Where to buy or service your Toro
|
 |
22806-Universal Swivel Auger
This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 46cm (18") in diametre. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more! You can even secure cables and tent posts with the screw anchor adapter.
|
|
|
|
Product Details
|
-
Universal Pivot
-
Recommended for bits up to 46cm (18")
|
|
|
|
|
| |
- Features
- Accessories
- Specifications
Planetary Gear Drive
Planetary Gear Drive
The plantetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. The planetary gear drive insures the longevity of the hydraulic motor.
|
One Person Auger Change
One Person Auger Change
Any of the Toro Augers can be changed by only one person! The 65mm (2 9/16") diametre shaft alows easy fitting of the head to the auger. Most other drive heads require two people to change the auger.
|
20 Universal Pivot
20 Universal Pivot
Power head swivels in all directions allowing the contractor to create plum holes on hills, slopes and uneven terrain. The universal swivel also makes the head adaptable for screw anchor installation and capstan adapter.
|
High Speed Drive
High Speed Drive
The high speed drive provides maximum bit speed allowing the auger to dig holes very fast. The high speed drive is fantastic for any contractor wanting to auger many holes in a short period of time.
|
15, 23, 30, 38, 46, 61, 76cm Augers
15, 23, 30, 38, 46, 61, 76cm Augers
Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro welds will not break under the same conditions. The Toro flighting is composed of 9,5mm (3/8") thick continuous steel where many other augers are 3mm (1/8") thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components.
|
Cement Bowl
Cement Bowl
Haul, mix, and pour up to 91 Kgs (200lbs) dry cement. Eliminates hand mixing.
|
30cm & 61cm Auger Extension
30cm & 61cm Auger Extension
Made from the same high strength material as the auger shaft, the extension can be added to increase the depth of the hole.
|
 |
Standard Equipment |
Quick Couplers |
|
|
2 - 14mm (9/16")
round outputshaft |
|
|
Dingo Quick-Attch Mount. Plate |
|
Pivot Pins |
25mm (1") O.D.
x 13mm (.5") I.D. steel space |
|
Motor: Type |
Eaton 2000 Series Geroler |
|
Displacement |
132 cubic cm/ rev
(8.0 cubic inches) |
|
Rated Pressure |
207 bar (3000 psi) continuous |
|
Flow Range |
0-76 LPM (0-20 GPM) |
|
Mounting Type |
4-Bolt Magneto Mounting |
|
Shaft Type |
32mm (1-1/4")
14 tooth splined shaft |
|
Ports |
22-356mm SAE ORB ports |
|
|
(7/8-14") |
|
Gear Drive: Type |
Auburn Gear Model 6 Planetary |
|
Hoses |
Two high-pressure hoses |
|
Quick Couplers |
Male & Female Flush Face |
|
Measurements: |
Length 46cm (18");
Width 64cm (25") |
|
|
Height 53cm (21");
Weight 98 kg (217lbs) |
|
Bit Speed: |
80rpm @ 42 LPM (11 GPM) |
|
Torque: |
323 m-kg @ 207 Bar |
|
|
(1060 ft-lb @ 3000 psi) |
|
| |
|
| |
|
| |
|
|
Toro Worldwide | The Toro Company Corporate Site