Where to buy or service your Toro
|
 |
22805-High Torque Auger Power Head
In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo's capability to dig 76cm (30") holes up to 1.5m (5') deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.
|
|
|
|
Product Details
|
-
Designed for large auger bits up to 76cm (30")
-
High Torque (Power) Drive
|
|
|
|
|
| |
- Features
- Accessories
- Specifications
One Person Bit Change
One Person Bit Change
Any of the Toro Augers can be changed on the head with only one person! The 65mm (2 9/16") diametre shaft allows easy fitting of the head to the auger. Most other competitors require two people to change an auger.
|
Single Directional Pivot
Single Directional Pivot
Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.
|
Horizontal Lockout
Horizontal Lockout
The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more.
|
Planetary Gear Drive
Planetary Gear Drive
The planetary gear drive provides maximum torque at a consistent level. The planetary gear drive also insures the longevity of the power head by transmitting less stress to the hydraulic motor.
|
30cm & 61cm Auger Extension
30cm & 61cm Auger Extension
Made from the same high strength material as the auger shaft, the extension can be added to increase the depth of the hole.
|
15, 23, 30, 38, 46, 61, 76cm Augers
15, 23, 30, 38, 46, 61, 76cm Augers
Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro augers will not break as easily. The Toro flighting is composed of 9,5mm (3/8") thick continuous steel where many other augers are 3mm (1/8") thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components.
|
Cement Bowl
Cement Bowl
Haul, mix, and pour up to 91 Kgs (200 lbs) dry cement. Eliminates hand mixing!
|
 |
Standard Equipment |
Quick Couplers |
|
|
2- 14mm (9/16")
round output shaft |
|
|
Dingo Quick-Attach
Mount Plate |
|
Pivot Pins |
25mm (1") |
|
Motor - Type: |
Eaton 2000 series Gerotor |
|
Displacement |
195 cubic cm
(11.9 cubic inches) |
|
Rated Pressure |
207 bar (3000 psi) continuous |
|
Gear Drive - Type: |
Auburn Gear Model 6 Planetary |
|
Hoses |
Two high-pressure hoses |
|
Quick Couplers |
Male & Female Flush Face |
|
Measurements |
Length 61cm (24") |
|
|
Width 41cm (16") |
|
|
Height 56cm (22") |
|
|
Weight 80 kg (176 lbs) |
|
Bit Speed: |
54 rpm @ 72 LPM, 95% efficiency |
|
|
(@11GPM, 95% efficiency) |
|
Torque: |
461 m-kg
@ 207 Bar,
@ 72 LPM |
|
|
(1514 ft-lb @3000psi, @11gpm) |
|
| |
|
| |
|
| |
|
|
Toro Worldwide | The Toro Company Corporate Site