Where to buy or service your Toro
|
 |
22331
The Dingo TX 420 is designed with workers in mind. All of its power is harnessed in only 3 easy to use controls, which make it simple for any worker to step up and be productive immediately! This power can be used to run over 35 Toro Dingo attachments. Its walk behind operator position provides 360° of visibility and outstanding operator mobility. When you step up to the Toro Dingo TX Compact Utility Loader, you can almost feel the power!
|
|
|
|
Product Details
|
-
15 kW (20 hp) Kohler® engine
-
87,6 cm (34,5") Wide
-
Versatile
-
Turf Friendliness
|
|
|
|
|
| |
- Features
- Accessories
- Specifications
4-Pump Hydraulic System
4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it! Not available on the Dingo TX 413.
|
Exclusive Track Drive
Exclusive Track Drive
Kevlar reinforced tracks, designed specifically for the Toro Dingo TX to offer excellent traction and floatation even in the most difficult conditions. This means you can power through the toughest jobs and still be light on the turf.
|
Hydraulic Power
Hydraulic Power
The Dingo TX 420 and 425 models direct 42 LPM (11.2 GPM) - 26 LPM (7 GPM) on the TX 413 - of hydraulic flow to the auxiliary circuit providing optimal power to any hydraulic attachment.
|
Compact Size
Compact Size
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.
|
Simple Controls
Simple Controls
You're up and running in a flash with three easy-to-use controls.
1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand.
2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control.
3) The third control, the auxiliary circuit control lever, which can be activiated while operating the traction drive, powers the attachments instantly.
|
Air-Cooled Gasoline Engine
Air-Cooled Gasoline Engine
15 kW (20 hp) (Dingo TX 420) and 18 kW (25 hp) (Dingo TX 425) Kohler® engines provide the necessary power to drive Toro's 35+ attachments.
|
Aggressive Thread Tracks
Aggressive Thread Tracks
Make those difficult job site conditions easier to maneuver with this aggressive track option. (Not available on the Dingo TX 425)
|
Ride-On Platform
Ride-On Platform
Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue - especially in applications requiring a lot of hauling and covering substantial distances.
Additional information
|
Sun Shade
Sun Shade
Blocks the sun while providing the operator with clear 360 visibility. For use with the Toro Dingo backhoe attachment.
|
 |
15 kW (20 hp) Engine |
Kohler® Command PRO™ |
|
Cooling System |
Air cooled |
|
Hydraulic Systm: Pressure |
207 Bar (3000 psi)
systm relief pressure |
|
Flow |
42 lpm (11,2 gpm) |
|
Reservoir Capacity |
40 litres (10,5 gallons) |
|
Track: Standard |
Endless Kevler rubber |
|
Controls |
Key, throttle, choke |
|
Steering |
Single control w/ ref. bar |
|
Loader/ Hydraulic System |
Joystick control for all funct |
|
Dimensions: Grd Clearance |
11,6 cm (4,6") |
|
Overall Length |
233,6 cm (92") |
|
Overall Width |
85,5 cm (33,7") |
|
Overall Height |
117 cm (46,1") |
|
Hinge Pin Height |
167 cm (65,8") |
|
Ground Speed |
0-7,2 km/h fwd., 1,6-3,2 km/h rev. |
|
|
(0-4,5 mi/h fwd., 1-2 mi/h rev.) |
|
Tip Capacity |
671 kg (1,480 lbs.) |
|
Rated Operating Capacity |
227 kg (500 lbs.) |
|
Weight (w/o narrow bucket |
830 kg (1,830 lbs.) |
|
Engine Warranty* |
Two Year |
|
Product Warranty* |
One Year |
|
| |
|
| |
|
| |
|
|
Toro Worldwide | The Toro Company Corporate Site