Where to Buy or Service your Toro
|
 |
TDC
Using a two-wire path to communicate to waterproof decoders located in the valve boxes, the TDC system eliminates the costs associated with traditional valve wire bundles and provides a solution that is vandal-resistant and easy to install and expand.
 |
|
|
 |
Product Details
|
-
Modular controller up to 200 stations
-
Large LCD display and simple, intuitive programming interface
-
10 independent irrigation programs and 1 non-irrigation program
-
6 start times per program
-
Non-volatile memory retains programming in the event of a power outage
-
1-, 2-, or 4-station decoders with built in surge protection
|
|
|
 |
|
| |
Control hundreds of stations
Control hundreds of stations
TDCs simple, intuitive and easy-to-use user interface makes it a breeze to control up to 200 stations. Operate up to 20 simultaneous stations, including remote pumps and master valves, up to 15,000 ft. from the controller.
|
Low power operation costs
Low power operation costs
The TDC Decoders operate DC Latching Solenoids which utilize significantly less power than AC solenoids.
|
Modular design
Modular design
The TDC has a base of 100 stations and can be upgraded to 200 stations without purchasing a new controller. Featuring a large LCD display and simple, intuitive programming interface.
|
Decoder Control
Decoder Control
Choose from 1, 2, and 4 station decoders as well as optional sensor decoders. Each decoder has the ability to drive 2 DC Latching Solenoids.
|
Advanced diagnostics
Advanced diagnostics
The TDC provides true two way communication with each decoder in the field, thus providing communication verification to decoders in the field, as well as shorted or open solenoid conditions, making troubleshooting a breeze.
|
 |
Electrical Input |
120 V AC or 220/240 V AC (50/60 Hz) |
 |
Station Output Power |
Up to 38 V AC max |
 |
|
3 amps max output |
 |
Solenoid Capacity |
2 Toro DCLS-P solenoids per output |
 |
|
Up to 40 max simultaneous |
 |
Wiring-Two Wire Path |
14 AWG to 4,5 km (15,000') |
 |
Wiring-Decoder to Solenoid |
14 AWG/1 mm to 120 m (400') |
 |
Cabinet dimensions (W x H x D) |
35 1/2 x 33 1/2 x 15cm |
 |
|
(14" x 13" x 6") |
 |
Operating Temperature |
-18°-60° C (0°-140° F) |
 |
UI. CUI approved |
|
|
| |
 |
| |
|
| |
|
|